|
05/04/09
New Reversible Surface Winder from Macro
After 30 years of building winders, Macro Engineering & Technology Inc. introduced the latest addition to its family of surface winders, the AUTOMAX-SBG Reversible Surface Winder.
 Unlike traditional gap surface winders that can only wind film in one direction, the AUTOMAX-SBG features a reversible winding mode, which allows the processor to choose whether to wind jumbo rolls with the film’s treated side in or with the treated side out. The switch between winding directions is uncomplicated; the operator simply needs to thread the film in the opposite direction around the drum and select the appropriate winding direction on the touch screen. The winder also features straight edge cutovers that are done without fold-over to produce rolls with flat, wrinkle-free film completely to the core. This allows the converter to utilize the entire roll and save costs from scrap. Other advantages of the AUTOMAX-SBG are the gap winding mode, programmable tension controls, fully automatic roll transfers, and an integrated shaft hoist that returns the shaft to the loading position without heavy lifting by the operator. The winder can handle rolls up to 1.5 m (4.9 ft) in diameter and film thickness from 15 to 400 microns (0.6 to 16 mil). Winding shafts are available in 76 mm (3 inch) and 152 mm (6 inch) sizes. It will wind materials up to 3 m (9.8 ft) wide at speeds up to 200 m/min (656 ft/min).
As with other Macro winders, the AUTOMAX-SBG features excellent tension control, simplified operation and requires minimal maintenance.
|
|
About Macro
Macro Engineering & Technology is a global supplier of film and sheet extrusion systems that specializes in barrier film lines and custom engineered extrusion systems. Founded in 1978, Macro’s approach is to help film and sheet producers reach their production goals through a project-oriented philosophy and an uncompromising commitment to developing innovative technologies.
Macro manufactures blown, cast and biaxially-oriented coextrusion lines for multilayer films up to 11-layers. The company also supplies sheet extrusion lines for specialty applications, along with extrusion coating and laminating lines. Macro also specializes in developing customized winding solutions and supplies winding equipment to meet the needs of complex requirements.
Macro’s equipment is used throughout the world to manufacture value-added products in the food packaging, medical, and industrial markets.
For more information about Macro Engineering & Technology Inc. contact us.
|
